Camper rv propane tank, vapour LPG gas tank 20 litres, 200x717 mm, 105°

Can be used with both STAKO and GZWM tanks.

Diameter:

Large outlet: 44mm
both small outlets: 26mm

Dimensions: 50 x 50 x 62 mm

Connection:3/4"-16UNF (filling hose, NOT a copper/flex line), 90° angled

Homologation:67R-01

T-piece with 3/4"-16 UNF thread for connecting LPG filling hoses.

Often used to connect one LPG filling point with two refillable gas bottles (e.g. CAMPKO or Alugas) operated in parallel. The T-piece connects the LPG filling hose from the filling point to the inlet side of both refillable gas bottles and allows the safe operation of a 2-cylinder gas supply system in a motorhome, camper van or caravan.

Length: 0.25 m - 3.00 m (special lengths are possible)

Outer diameter: 19 mm

Inner diameter: 12 mm

Thread: 3/4-16 UNF

Width across flats union nut:22 mm

Homologation: 67R-01 Class 1

Length: 0.25 m - 3.00 m (special lengths are possible)

Outer diameter: 19 mm

Inner diameter: 12 mm

Thread: 3/4-16 UNF

Width across flats union nut:22 mm

Homologation: 67R-01 Class 1

Length: 0.25 m - 3.00 m (special lengths are possible)

Outer diameter: 19 mm

Inner diameter: 12 mm

Thread: 3/4-16 UNF

Width across flats union nut:22 mm

Homologation: 67R-01 Class 1

Length: 0.25 m - 3.00 m (special lengths are possible)

Outer diameter: 19 mm

Inner diameter: 12 mm

Thread: 3/4-16 UNF

Width across flats union nut:22 mm

Homologation: 67R-01 Class 1

Length: 0.25 m - 3.00 m (special lengths are possible)

Outer diameter: 19 mm

Inner diameter: 12 mm

Thread: 3/4-16 UNF

Width across flats union nut:22 mm

Homologation: 67R-01 Class 1

Length: 0.25 m - 3.00 m (special lengths are possible)

Outer diameter: 19 mm

Inner diameter: 12 mm

Thread: 3/4-16 UNF

Width across flats union nut:22 mm

Homologation: 67R-01 Class 1

Length: 0.25 m - 3.00 m (special lengths are possible)

Outer diameter: 19 mm

Inner diameter: 12 mm

Thread: 3/4-16 UNF

Width across flats union nut:22 mm

Homologation: 67R-01 Class 1

Length: 0.25 m - 3.00 m (special lengths are possible)

Outer diameter: 19 mm

Inner diameter: 12 mm

Thread: 3/4-16 UNF

Width across flats union nut:22 mm

Homologation: 67R-01 Class 1

Length: 0.25 m - 3.00 m (special lengths are possible)

Outer diameter: 19 mm

Inner diameter: 12 mm

Thread: 3/4-16 UNF

Width across flats union nut:22 mm

Homologation: 67R-01 Class 1

Length: 0.25 m - 3.00 m (special lengths are possible)

Outer diameter: 19 mm

Inner diameter: 12 mm

Thread: 3/4-16 UNF

Width across flats union nut:22 mm

Homologation: 67R-01 Class 1

Length: 0.25 m - 3.00 m (special lengths are possible)

Outer diameter: 19 mm

Inner diameter: 12 mm

Thread: 3/4-16 UNF

Width across flats union nut:22 mm

Homologation: 67R-01 Class 1

Length: 0.25 m - 3.00 m (special lengths are possible)

Outer diameter: 19 mm

Inner diameter: 12 mm

Thread: 3/4-16 UNF

Width across flats union nut:22 mm

Homologation: 67R-01 Class 1

Length: 0.25 m - 3.00 m (special lengths are possible)

Outer diameter: 19 mm

Inner diameter: 12 mm

Thread: 3/4-16 UNF

Width across flats union nut:22 mm

Homologation: 67R-01 Class 1

Length: 0.25 m - 3.00 m (special lengths are possible)

Outer diameter: 19 mm

Inner diameter: 12 mm

Thread: 3/4-16 UNF

Width across flats union nut:22 mm

Homologation: 67R-01 Class 1

Length: 0.25 m - 3.00 m (special lengths are possible)

Outer diameter: 19 mm

Inner diameter: 12 mm

Thread: 3/4-16 UNF

Width across flats union nut:22 mm

Homologation: 67R-01 Class 1

Length: 0.25 m - 3.00 m (special lengths are possible)

Outer diameter: 19 mm

Inner diameter: 12 mm

Thread: 3/4-16 UNF

Width across flats union nut:22 mm

Homologation: 67R-01 Class 1

Length: 0.25 m - 3.00 m (special lengths are possible)

Outer diameter: 19 mm

Inner diameter: 12 mm

Thread: 3/4-16 UNF

Width across flats union nut:22 mm

Homologation: 67R-01 Class 1

Length: 0.25 m - 3.00 m (special lengths are possible)

Outer diameter: 19 mm

Inner diameter: 12 mm

Thread: 3/4-16 UNF

Width across flats union nut:22 mm

Homologation: 67R-01 Class 1

Length: 0.25 m - 3.00 m (special lengths are possible)

Outer diameter: 19 mm

Inner diameter: 12 mm

Thread: 3/4-16 UNF

Width across flats union nut:22 mm

Homologation: 67R-01 Class 1

Length: 0.25 m - 3.00 m (special lengths are possible)

Outer diameter: 19 mm

Inner diameter: 12 mm

Thread: 3/4-16 UNF

Width across flats union nut:22 mm

Homologation: 67R-01 Class 1

Inlet: Komb.A
Outlet: RVS 10 mm

Outlet pressure: 30 mbar
Capacity: 1,5 kg/h

Installation position: direct mounting on the vapour gas tank
Installation angle: 105°

Crash sensor for gas use while driving: included
Maximum allowable pressure: PS 16 bar

Bedienungsanleitung Caramatic BasicOne - Deutsch / Englisch / Französisch / Spanisch / Niederländisch / Italienisch / Dänisch / Norwegisch Nynorsk / Schwedisch / Finnisch / Polnisch

DREHMEISTER cylinder filter for direct mounting on the Withdrawal valve of the gas cylinder/ LPG tank or for mounting in the gas locker. The replaceable filter insert is made of glass fibre material.

Filter inlet: 21.8 LH - straightFilter outlet: G. 12 small cylinder connection - 90° angled

Gas type: LPG (propane/butane), CNG (natural gas) Operating pressure: up to 30.4 bar

Working temperature: -20° to 125° Dimensions: 12 x 6.5 x 9.0 cm (L x W x H)

Weight: 448 g

The filter insert is made of a high-quality borosilicate-micro glass fibre mixture and meets the following standards:

TAPPI T410TAPPI T251DIN 53'887ASTM E1294ISO 16889TAPPI T403

DREHMEISTER LPG attachmentwith sintered filter insert for W21.8x1/14" LPG filling adapter for W21,8x1/14". Is used as an intermediate piece on the W21.8x1/14" LPG gas connector and the HK flat filler neck or the direct refuelling adapter for gas cylinders.

Areas of application: Refuelling refillable gas bottles, motorhome gas tanks and autogas tanks (automotive).

Very suitable for installation in the filling hose (between 2 filling hoses).

4DREHMEISTER LPG gas connectors DISH, BAJONETT, ACME and EURONOZZLE in a stylish case and 22mm (W21.8) design for all common tank connections.

- High-quality workmanship- robust

Scope of delivery:

- 1x DREHMEISTER DISH 22mm LPG gas connector
- 1x DREHMEISTER BAJONETT 22mm LPG gas connector
- 1x DREHMEISTER EURONOZZLE 22mm LPG gas connector
- 1x DREHMEISTER ACME 22mm LPG gas connector
- 1x DREHMEISTER adapter case for ACME, DISH, Bayonet, Euronozzle gas connectors

Fields of application:

- HK flat connections- adapters/connections with 22mm internal thread

Edelstahl-Halter und 2 Bänder zur Unterflurmontage von Propan-/Buton Gastank für Wohnmobile und Autogasfahrzeuge. Für alle zylidndrischen Tanks mit einem Durchmesser von 200-240mm geeignet.

Anwendung:Unterflurmontage am Fahrzeug

Material:Edelstahl

Rotarex WAVE Bluetooth Remote Readout for 4-hole rv propane tanks

Monitor the level of your refillable gas bottles from the comfort of your smartphone.

Compatible with all 4-hole rv propane tanks e.g. CAMPKO, GZWM, Stako, GasIt, Pratko, Witte van Moort, etc.

The existing fuel gauge on the rv propane tank is replaced with a new transmitter using the Allen tool supplied. This transmitter transmits the fill level directly to your smartphone or tablet via the WAVE Box using Bluetooth. The "Dimes SRG App" from Roatex is available free of charge in all common app stores.

Scope of delivery:

Hall Sensor 0.5 - 4.5 V (RRD Remote Readout Dial).

WAVE transmitter box with 1 m cable length (without batteries)

Holder for WAVE box with Velcro fastener

Socket spanner with 2 screws for replacement

Livello L.7 LED Inhaltsanzeige inklusive Ein- und Ausschalter, inklusive 0-95 ohm Tankgeber (wird am Tank bzw. an der Flasche montiert).

Für alle Tanks- und Flaschen mit 4-Loch-Technik geeignet!

Lieferumfang:

- Livello L.7 LED Inhaltsanzeige inkl. Ein- und Ausschalter- Schaltplan (englisch) - Tankgeber 0-95 Ohm für die Flasche

DREHMEISTER connector W21.8 x 1/14 LH -> 8 mm RVS for connecting an 8 mm line to the W21.8L tapping connection on refillable gas cylinders/tanks

Connection:

Small cylinder connection, KLF (G.12)
Large cylinder connection, comb. A (G.5)

According to EN15252: W21.8 x 1/14 LH

Outlet:

8 mm pipe connection, e.g. copper or aluminium pipe or thermoplastic hose

Connection A: 3/4-16 UNF (filling hose) 

Connection B: G1/4" (RVS - 8 mm pipe connection, e.g. copper or aluminium pipe)