2 cylinder gas regulator system forwall mounting in the gas locker- "Gas utilisation while driving"
The set consists of a 2-bottle regulator system 30 mbar 1.5 kg/h, control and switch panel and the Crash Protection Unit (CPU).
Thanks to the 2 cylinder multimatic, twogas cylinderscanbe connected at the same time. Once the operating cylinder is empty, the Multimatik automatically switches to the reserve cylinder.
Thanks to the patented CrashProtection Unit (CPU), it is possible to use appliances such as heaters, refrigerators, etc.both when stationaryand when travelling. The CPU is firmly connected to the chassis at any point inside the vehicle using 4 screws.
In the event of an accident, emergency braking or an incline of 57° or more, the gas supply is interrupted immediately. In addition, almost all common gas warning devices can be connected directly to the CPU. In the event of a "gas alarm", the gas supply is also interrupted immediately to maximise your safety.
The Crah sensor integrated in the CPU can be reset via the switch in the vehicle cockpit.
The EU heater directives in accordance with 2001/56/EC, including the special regulations for France, are fully complied with. Two high-pressure hoses with hose rupture safety devices (SBS) can be connected.
Technical data:
Outlet pressure: 30 mbar
Flow rate: 1.5 kg/h
Regulator inlet: External thread M 20 x 1.5
Regulator outlet: 10 mm pipework with adapter piece to 8 mm pipework
Scope of delivery:
- 2 cylinders regulator system 30 mbar / 1.5 kg/h with test valve
- Connection for 8 mm and 10 mm gas pipe
- Control unit with crash sensor
- Display and control element (on/off switch)
- 3 m connection cable from solenoid valve to control unit
- 8 m control cable (control unit to control panel)
- Installation and operating instructions
Safety instructions and warnings
Safety instructions for Cavagna 2-bottle system, gas regulator 30 mbar 1.5 kg/h with crash sensor
- Only use the product in accordance with the manufacturer's instructions.
- Ensure that the product is properly installed and that all connections are tight.
- Check the condition of the gas regulator regularly and replace it if it is damaged.
- Do not use the product near naked flames or flammable materials.
- Keep the product away from sources of heat and direct sunlight.
- Ensure that the product is not punctured or damaged in any other way.
- Keep the product out of the reach of children.
- Observe the maximum permissible operating pressure of the gas regulator.
- If problems or irregularities occur, contact an authorised specialist.
- Observe all applicable safety regulations and precautionary measures.
Manufacturer Contact information
Manufacturer contact
Cavagna Group
Via Statale n. 11/13
25011 Ponte S. Marco di Calcinato
Brescia - Italy
https://www.cavagnagroup.com/contacts/
