Composite refillable gas bottle, from current production!
The80%fill stop valveautomaticallystops the refuelling process when the cylinder is filled to 10 KG / 19.6 litresand refuelling is possible at any time!
The low weight of only 5.5 kg allowseasy handling and versatile use, e.g. barbecuing, heating, cooking etc.
The refillable gas cylinder is supplied with all LPG gas connectors used in Europe.
Advantages:
-Lighterthan aluminium or steel bottles
-Rust-freecomposite material
- Easy handling thanks to comfortablecarrying handles
- No painting necessary
- Can be used flexibly
80%filling stopforautomatic switch-off- refuelling possible at any time!
- No cylinder change - independent of gas deposit cylinders
- Low-cost refuelling at more than 30,000 filling stations throughout Europe
- Compatible with all gas-powered appliances such as heaters, refrigerators, cookers, etc.
Technical data:
Capacity: propane 10.8kg / butane 12.9kg
Water capacity 24.5 litres
Height 583mm
Diameter 310mm
Empty weight 5.5kg
G.5 outlet inclsuive adapter to G.12 small cylinder connection
Approvals: 2014/68/EU + ADR/RID 2015 + ISO11119-3:2002
Included in the scope of delivery:
1x composite refillable gas cylinder 24.5 litres with OPD valve
1x adapter from G.5 to G.12 small cylinder connection
1x bayonet LPG gas connector with integrated nipple for filling gas cylinders with W21.8L thread
1x ACME LPG gas connector W21.8mm
1x Euronozzole LPG gas connector W21.8mm
1x DISH LPG gas connector W21.8mm
1x DREHMEISTER adapter case for ACME, DISH, bayonet, Euronozzle LPG gas connector
QUESTIONS & ANSWERS
What do I need to consider before refuelling for the first time?
The refillable gas cylinders are tested for leaks at the factory using air pressure. Therefore, the Withdrawal valve (handwheel) should be opened before refuelling to release the pressure and then closed again. However, a small amount of residual air remains in the refillable gas cylinder. When refuelling for the first time, this results in enormous coldness inside the tank. In exceptional cases, the float of the fill stop valve may freeze and not close in time. Therefore, never fill the tank with more than 19.6 litres of fuel. Even with a two-bottle system, never fill up with more than specified. Observe the petrol pump's drive during the refuelling process and stop it manually if necessary.
What are the differences between the bottles you offer?
The most important difference is the material. If the weight does not play a major role for you, the steel cylinders are the most favourable options for a sustainable gas supply. If you absolutely want to get by with less additional weight, you should consider our ALUGAS or composite cylinders. You can find out more in the respective cylinder product description.
What are the differences between the composite cylinders on offer?
With composite cylinders, a basic distinction is made between a multivalve cylinder and an OPD valve cylinder. While the OPD bottle scores points for price, the multivalve bottle offers separate connections for refuelling and dispensing as well as a proper fuel gauge on the valve itself.
What happens after 10 years?
After 10 years, the cylinder must be checked again or replaced.
Can the cylinder lie flat?
The cylinder must be mounted vertically to ensure that the 80% filling stop and gaseous withdrawal function.
Which gas may be refuelled?
The so-called bottled gas from the conventional exchange cylinders does not differ in principle from LPG, which you refuel yourself. Both gases are a mixture of propane and butane. Abroad, LPG is also known as GLP or GPL.
Why are there so many different sets on offer?
We try to offer the right set for everyone. Therefore, please note the scope of delivery in the description of the respective set. If you cannot find what you are looking for, simply contact us using the contact form. A competent member of staff will help you with your question.
