Serves as an adapter for pressure regulators with German (KLF) connection to the gas cylinders commonly used on the European market. For connecting a pressure regulator with German connection to standard gas cylinders on the European market.
KLF x IG W 21.8 x 1/14 LH = France, Belgium, Spain, Netherlands, Switzerland, Czech Republic Ireland, Croatia, Luxembourg, Macedonia, Latvia, Montenegro, Serbia, Slovakia, Slovenia
Technical data
Input female thread W 21.8 x 1/14 LH
Outlet thread G.12 = W21.8 x 1/14 LH
Material Brass
Application France, Belgium, Spain, Netherlands, Switzerland, Czech Republic Ireland, Croatia, Luxembourg, Macedonia, Latvia, Montenegro, Serbia, Slovakia, Slovenia
Safety instructions and warnings
Safety instructions for DREHMEISTER gas tapping nozzle no. 4 KLF x IG W 21.8 x 1/14 LH
- The DREHMEISTER gas tapping point may only be installed and commissioned by qualified specialist personnel.
- Before installation, it must be ensured that the tapping point is suitable for the intended gas type.
- It is important that the seals and connections of the tapping point are checked regularly for damage or wear.
- The tapping point must be installed in accordance with the applicable safety regulations.
- Suitable protective equipment such as gloves and safety goggles must be worn during installation and commissioning.
- The tapping point must not be installed in the vicinity of ignition sources.
- Never attempt to modify or convert the tapping point.
- The extraction nozzle must not be operated if it is damaged or leaking.
- In the event of a leak, the gas supply must be interrupted immediately and the tapping point replaced.
- Due to possible health risks, the tapping point must not be operated in enclosed spaces.
- It is important that only authorised personnel carry out maintenance and repair work on the tapping point.
- The gas supply must be switched off and the system completely emptied before maintenance or repair work is carried out.
Manufacturer contact information
