DREHMEISTER gas filling connector D3 (KLF x AG M 14 x 1,5)

9,90 €

incl. 19% VAT , plus

Adapter for filling German gas cylinders by authorised European filling stations in England, Portugal, Norway, Sweden, Finland and Iceland.

Safety instructions and warnings

Safety instructions for DREHMEISTER gas filling nozzle D3 (KLF x AG M 14 x 1.5)

The DREHMEISTER gas filler neck D3 (KLF x AG M 14 x 1.5) may only be used by qualified personnel.
Only the gas recommended by the manufacturer may be used.
The ambient temperature must not exceed the specified range.
Check the condition of the filler neck before use. Damaged or worn parts must be replaced.
Filling may only be carried out at designated locations.
Ensure adequate ventilation during the filling process.
Do not smoke, flame or generate sparks.
The filler neck must not be overloaded.
The filler neck must be properly cleaned and stored after use.
In the event of accidents or damage, the filler neck must be taken out of service and repaired by authorised personnel.

Manufacturer contact information

Contact manufacturer

HybridSupply GmbH

Roggenhorsterstr. 9b

23556 Lübeck