Non-return valve for LPG thermoplastic pipe 1/4" (8mm)

16,90 €

incl. 19% VAT , plus

An LPG non-return valve for installation in the LPG thermoplastic hose 8mm (1/4").

Safety instructions and warnings

Safety instructions for non-return valve for LPG thermoplastic pipe 1/4" (8mm)

The non-return valve may only be used for its intended purpose.
The installation of the non-return valve should be carried out by a qualified person.
The check valve must be checked for damage or wear before installation.
It is important that the direction of flow of the medium is observed. The non-return valve should be installed so that the medium flows in the direction of the arrow.
Ensure that the maximum operating temperature of the non-return valve is not exceeded.
The non-return valve should be checked regularly for wear and damage.
The non-return valve should be replaced if necessary.
It is important that the non-return valve is protected from frost and other weather influences.
The non-return valve must not be overloaded.

Manufacturer contact information

EU Contact

HybridSupply GmbH

Roggenhorsterstr. 9b

23556 Lübeck