Valtek injector rail STD 1 ohm type 30 (3 cyl.)

39,90 €

incl. 19% VAT , plus

Technical data Valtek T30 STD Rail
Operating voltage	12-16 V
Input connection	ø12 mm
Resistance	1.0 Ohm
Opening at 0.1MPa	3.1 ms
Closing at 0.1MPa	1.8 ms

The colour of the solenoid coils may vary, the resistance (1 Ohm) is important.

Area of application:

Valtek T30 is used in numerous systems, e.g. KME, STAG, ZENIT and others.

Scope of delivery:

1x VALTEK 3 cylinder injector coil 1 Ohm (yellow) including accessories (without injector nozzles!)

Homologation and manufacturer numbers:

Injectors: E4 67R - 010104

Safety instructions and warnings

Safety instructions for Valtek LPG injector CNG type 30 STD 1 Ohm 3 cylinder:

The product may only be installed, adjusted and maintained by authorised persons.
The applicable safety regulations must be observed during installation, adjustment or maintenance work.
The product must be installed in accordance with all relevant national and international standards and regulations.
All necessary authorisations must be obtained before the product is installed.
The product must not be installed in potentially explosive atmospheres.
The product must not be installed in areas where it is exposed to temperatures above 80°C.
The product must not be installed in areas where it is exposed to strong vibrations.
The product must be properly earthed.
The product must not be affected by magnetic fields.
The product must be checked regularly for wear and damage.
Any modifications to the product may only be carried out by authorised persons.
The product must be maintained in accordance with the manufacturer's instructions.
The product must be serviced at the prescribed intervals.
If damage or malfunction of the product is suspected, use must be discontinued immediately.

Manufacturer contact information

VALTEK:

Westport Fuel System Italia s.r.l.

Via La Morra, 1

12062 Cherasco CN

Italy

info.valtek@wfsinc.com

Item weight:	0,46 kg

There are no reviews yet.