CAMPKO refillable gas bottle 30 litres with 80% multivalve

4DREHMEISTER LPG gas connectors DISH, BAJONETT, ACME and EURONOZZLE in a stylish case and 22mm (W21.8) design for all common tank connections.

- High-quality workmanship- robust

Scope of delivery:

- 1x DREHMEISTER DISH 22mm LPG gas connector
- 1x DREHMEISTER BAJONETT 22mm LPG gas connector
- 1x DREHMEISTER EURONOZZLE 22mm LPG gas connector
- 1x DREHMEISTER ACME 22mm LPG gas connector
- 1x DREHMEISTER adapter case for ACME, DISH, Bayonet, Euronozzle gas connectors

Fields of application:

- HK flat connections- adapters/connections with 22mm internal thread

Material:

Inner core: Nylon (polyamide 6)
Binding: Chemically bonded inner core and reinforcement
Outer cover: Nylon (polyamide 6), black

Dimensions:

Inner diameter: 9.7mm
Outer diameter: 13.7mm
Bending radius: 100mm
Weight: 75gr/m

Properties:

Burst pressure test: 370 bar
Working pressure: 90 bar
Working temperature: -40°C to +125C

Homologationsnummer: E4-67R-010247

Material:

Inner core: Nylon (polyamide 6)
Binding: Chemically bonded inner core and reinforcement
Outer cover: Nylon (polyamide 6), black

Dimensions:

Inner diameter: 9.7mm
Outer diameter: 13.7mm
Bending radius: 100mm
Weight: 75gr/m

Properties:

Burst pressure test: 370 bar
Working pressure: 90 bar
Working temperature: -40°C to +125C

Homologationsnummer: E4-67R-010247

Material:

Inner core: Nylon (polyamide 6)
Binding: Chemically bonded inner core and reinforcement
Outer cover: Nylon (polyamide 6), black

Dimensions:

Inner diameter: 9.7mm
Outer diameter: 13.7mm
Bending radius: 100mm
Weight: 75gr/m

Properties:

Burst pressure test: 370 bar
Working pressure: 90 bar
Working temperature: -40°C to +125C

Homologationsnummer: E4-67R-010247

Material:

Inner core: Nylon (polyamide 6)
Binding: Chemically bonded inner core and reinforcement
Outer cover: Nylon (polyamide 6), black

Dimensions:

Inner diameter: 9.7mm
Outer diameter: 13.7mm
Bending radius: 100mm
Weight: 75gr/m

Properties:

Burst pressure test: 370 bar
Working pressure: 90 bar
Working temperature: -40°C to +125C

Homologationsnummer: E4-67R-010247

Length: 0.25 m - 3.00 m (special lengths are possible)

Outer diameter: 19 mm

Inner diameter: 12 mm

Thread: 3/4-16 UNF

Width across flats union nut:22 mm

Homologation: 67R-01 Class 1

Length: 0.25 m - 3.00 m (special lengths are possible)

Outer diameter: 19 mm

Inner diameter: 12 mm

Thread: 3/4-16 UNF

Width across flats union nut:22 mm

Homologation: 67R-01 Class 1

Length: 0.25 m - 3.00 m (special lengths are possible)

Outer diameter: 19 mm

Inner diameter: 12 mm

Thread: 3/4-16 UNF

Width across flats union nut:22 mm

Homologation: 67R-01 Class 1

Length: 0.25 m - 3.00 m (special lengths are possible)

Outer diameter: 19 mm

Inner diameter: 12 mm

Thread: 3/4-16 UNF

Width across flats union nut:22 mm

Homologation: 67R-01 Class 1

Length: 0.25 m - 3.00 m (special lengths are possible)

Outer diameter: 19 mm

Inner diameter: 12 mm

Thread: 3/4-16 UNF

Width across flats union nut:22 mm

Homologation: 67R-01 Class 1

Length: 0.25 m - 3.00 m (special lengths are possible)

Outer diameter: 19 mm

Inner diameter: 12 mm

Thread: 3/4-16 UNF

Width across flats union nut:22 mm

Homologation: 67R-01 Class 1

Length: 0.25 m - 3.00 m (special lengths are possible)

Outer diameter: 19 mm

Inner diameter: 12 mm

Thread: 3/4-16 UNF

Width across flats union nut:22 mm

Homologation: 67R-01 Class 1

Length: 0.25 m - 3.00 m (special lengths are possible)

Outer diameter: 19 mm

Inner diameter: 12 mm

Thread: 3/4-16 UNF

Width across flats union nut:22 mm

Homologation: 67R-01 Class 1

Length: 0.25 m - 3.00 m (special lengths are possible)

Outer diameter: 19 mm

Inner diameter: 12 mm

Thread: 3/4-16 UNF

Width across flats union nut:22 mm

Homologation: 67R-01 Class 1

Length: 0.25 m - 3.00 m (special lengths are possible)

Outer diameter: 19 mm

Inner diameter: 12 mm

Thread: 3/4-16 UNF

Width across flats union nut:22 mm

Homologation: 67R-01 Class 1

Length: 0.25 m - 3.00 m (special lengths are possible)

Outer diameter: 19 mm

Inner diameter: 12 mm

Thread: 3/4-16 UNF

Width across flats union nut:22 mm

Homologation: 67R-01 Class 1

Length: 0.25 m - 3.00 m (special lengths are possible)

Outer diameter: 19 mm

Inner diameter: 12 mm

Thread: 3/4-16 UNF

Width across flats union nut:22 mm

Homologation: 67R-01 Class 1

Length: 0.25 m - 3.00 m (special lengths are possible)

Outer diameter: 19 mm

Inner diameter: 12 mm

Thread: 3/4-16 UNF

Width across flats union nut:22 mm

Homologation: 67R-01 Class 1

Length: 0.25 m - 3.00 m (special lengths are possible)

Outer diameter: 19 mm

Inner diameter: 12 mm

Thread: 3/4-16 UNF

Width across flats union nut:22 mm

Homologation: 67R-01 Class 1

Length: 0.25 m - 3.00 m (special lengths are possible)

Outer diameter: 19 mm

Inner diameter: 12 mm

Thread: 3/4-16 UNF

Width across flats union nut:22 mm

Homologation: 67R-01 Class 1

Length: 0.25 m - 3.00 m (special lengths are possible)

Outer diameter: 19 mm

Inner diameter: 12 mm

Thread: 3/4-16 UNF

Width across flats union nut:22 mm

Homologation: 67R-01 Class 1

Length: 0.25 m - 3.00 m (special lengths are possible)

Outer diameter: 19 mm

Inner diameter: 12 mm

Thread: 3/4-16 UNF

Width across flats union nut:22 mm

Homologation: 67R-01 Class 1

Length: 0.25 m - 3.00 m (special lengths are possible)

Outer diameter: 19 mm

Inner diameter: 12 mm

Thread: 3/4-16 UNF

Width across flats union nut:22 mm

Homologation: 67R-01 Class 1

Length: 0.25 m - 3.00 m (special lengths are possible)

Outer diameter: 19 mm

Inner diameter: 12 mm

Thread: 3/4-16 UNF

Width across flats union nut:22 mm

Homologation: 67R-01 Class 1

Length: 0.25 m - 3.00 m (special lengths are possible)

Outer diameter: 19 mm

Inner diameter: 12 mm

Thread: 3/4-16 UNF

Width across flats union nut:22 mm

Homologation: 67R-01 Class 1

Bedienungsanleitung Caramatic ConnectBasic / Caramatic ConnectDrive - Deutsch / Englisch / Französisch / Spanisch / Niederländisch / Italienisch / Dänisch / Norwegisch Nynorsk / Schwedisch / Russisch / Slowenisch / Polnisch

CAMPKO Gasflaschen Halterung eignet sich zur Befestigung von herkömmlichen Tausch-Gasflaschen, Alugas Tankflaschen und CAMPKO Gastankflaschen. Der Gasflaschen Halter ist für den Festeinbau von Gastankflaschen im Wohnmobil, Camper Vans oder Caravan prädestiniert, kann aber ebenso für industrielle Zwecke oder zur Befestigung von Gasflaschen im Freizeitbereich verwendet werden.

Befestigungsplatte und Spanngurte sind aus hochwertigem Edelstahl. Die Spanngurte sind zusätzlich gummiert.

Das Öffnen und Schließen der Spannschlösser erfolgt über zwei Innensechskant-Schrauben, so dass die Gasflasche jederzeit schnell entnommen werden kann.

Beim Festeinbau im Wohnmobil wird der Gasflaschen Halter fest mit der Rück- oder Seitenwand des Gaskastens verschraubt. Für eine höhere Stabilität empfiehlt sich die Verbindung zur Fahrzeugkarosserie, oder durch Einsatz einer Konterplatte (112652) auf der rückseitigen Wandseite des Gaskastens.

CAMPKO stainless steel strap with turnbuckle for gas bottle holder for mounting CAMPKO, Alugas or other gas bottles with a diameter of 300mm. The band thickness is 1.5x30mm and thus meets the requirements of the ECE-R67/01 standard.

Material: Galvanized steel

Assembly material included: Consisting of M8 (8.8) hex bolts, washers and self-locking nuts.

MOPEKA contact gel 1ml for all MOPEKA sensors. The gel is applied to the sensor pad and improves the contact between the sensor and the container, especially on uneven floors.

Monitor for gas cylinder sensor (without sensor!)

Use:

The monitor can be mounted anywhere in the vehicle interior and displays the fill level of up to two gas cylinders.

Contents:

1x monitor for the interior.

Certifications:

CE EN 60950-1:2006

The Mopeka® LCD Display is the first and only remote LCD display designed to seamlessly pair with up to two Bluetooth-enabled Mopeka sensors, including the Pro Check, Universal, Pro200 and Pro Plus models. This compact display is both user-friendly and highly portable, with a mounting bracket and built-in magnets so your sensors are available when you need them, wherever you need them. With its simple, robust design, the Mopeka LCD Display delivers the precision and accuracy our customers expect.

With a battery life of up to 5 years and easily replaceable batteries, the Mopeka LCD Display allows you to control and configure your connected Mopeka Bluetooth sensors. You can switch between different media such as water, oil, propane and diesel, and adjust the screen time and brightness to suit your needs. The system also supports sensor configurations for vertical and horizontal tanks, with preset options for tanks up to 1,000 gallons/ 3,785 litres or an ‘arbitrary’ mode in which you can enter custom tank dimensions, orientation and volume.

The Mop eka LCD display, you are always informed and in control.

• The display comes with 4 x CR2032 batteries that are pre-installed. To replace the batteries, remove the screws on the back of the display and take off the back cover. Insert the batteries negative side down, double stacked on either side of the display. Make sure the batteries are securely in place. Replace the back cover and tighten the screws.

NOTE – The tank settings are set by default to 20lb propane vertical tanks during commissioning. To change settings and preset goods, watch the comprehensive installation video from the QR code.

CAMPKO V2A clamping plate for ALUGAS cylinders.

Application: for use of the Mopeka Bluetooth sensor on ALUGAS cylinders up to max. 265 mm inner diameter at the base.

These clamping plates are not suitable for bottles with an internal diameter of 267-269 mm!

Material: stainless steel

The Mopeka adhesive frame is used to attach PRO sensors to non-magnetic gas cylinders, water bottles or other containers. The Mopeka PRO sensor is placed in the notch, the protective film is removed from the adhesive strip and then glued to the aluminium, plastic or composite container, for example.

A distinction is made between two different adhesive frames:

• For gas cylinders with a curved contact surface, which is adapted to the curvature of the gas container to ensure better adhesion.
• For flat containers, such as water tanks, where the contact surface is flat.

T-piece with 3/4"-16 UNF thread for connecting LPG filling hoses.

Often used to connect one LPG filling point with two refillable gas bottles (e.g. CAMPKO or Alugas) operated in parallel. The T-piece connects the LPG filling hose from the filling point to the inlet side of both refillable gas bottles and allows the safe operation of a 2-cylinder gas supply system in a motorhome, camper van or caravan.

DREHMEISTER cylinder filter for direct mounting on the Withdrawal valve of the gas cylinder/ LPG tank or for mounting in the gas locker. The replaceable filter insert is made of glass fibre material.

Filter inlet: 21.8 LH - straightFilter outlet: G. 12 small cylinder connection - 90° angled

Gas type: LPG (propane/butane), CNG (natural gas) Operating pressure: up to 30.4 bar

Working temperature: -20° to 125° Dimensions: 12 x 6.5 x 9.0 cm (L x W x H)

Weight: 448 g

The filter insert is made of a high-quality borosilicate-micro glass fibre mixture and meets the following standards:

TAPPI T410TAPPI T251DIN 53'887ASTM E1294ISO 16889TAPPI T403

DREHMEISTER LPG attachmentwith sintered filter insert for W21.8x1/14" LPG filling adapter for W21,8x1/14". Is used as an intermediate piece on the W21.8x1/14" LPG gas connector and the HK flat filler neck or the direct refuelling adapter for gas cylinders.

Areas of application: Refuelling refillable gas bottles, motorhome gas tanks and autogas tanks (automotive).

Very suitable for installation in the filling hose (between 2 filling hoses).

DREHMEISTER connector W21.8 x 1/14 LH -> 8 mm RVS for connecting an 8 mm line to the W21.8L tapping connection on refillable gas cylinders/tanks

Connection:

Small cylinder connection, KLF (G.12)
Large cylinder connection, comb. A (G.5)

According to EN15252: W21.8 x 1/14 LH

Outlet:

8 mm pipe connection, e.g. copper or aluminium pipe or thermoplastic hose

Connection A: 3/4-16 UNF (filling hose) 

Connection B: G1/4" (RVS - 8 mm pipe connection, e.g. copper or aluminium pipe)