TheCAMPKO gas cylinder stand is suitable for mounting conventional exchangeable gas cylinders, aluminium refillable gas cylinders and CAMPKO refillable gas cylinders. The gas bottle holder is predestined for the permanent installation of refillable gas bottles in motorhomes, camper vans or caravans, but can also be used for industrial purposes or for attaching gas bottles in the leisure sector.
The mounting plate and tensioning straps are made of high-quality stainless steel. The tensioning straps are also rubberised.
The turnbuckles are opened and closed using two hexagon socket screws so that the gas cylinder can be removed quickly at any time.
When permanently installed in the motorhome, the gas bottle holder is firmly screwed to the rear or side wall of the gas locker. For greater stability, we recommend connecting it to the vehicle body or using a counter plate (112652) on the rear wall of the gas locker.
Safety and warning information
Product description: The CAMPKO gas bottle holder has been specially developed for the secure fastening of refillable gas bottles in vehicles or stationary gas storage rooms. The product is compatible with UN Regulation No. 67 and ensures safe use when properly installed.
Area of application: The gas cylinder holder is intended for use in vehicles or stationary areas to securely fix gas cylinders and facilitate transport.
WARNING: Failure to observe the safety instructions may result in serious injury or damage to property.
- Installation may only be carried out by trained personnel.
- Only use the fastening elements included in the scope of delivery.
- Ensure that the bracket is firmly attached to the vehicle frame or a suitable surface.
- Check the seals and the correct attachment of the gas cylinder before each use.
- Always store gas cylinders in well-ventilated areas.
- Protect the holder and the gas bottle from extreme temperatures and direct sunlight.
- Do not use the gas cylinder holder for damaged or unauthorised gas cylinders.
Tools required:
- 13 mm socket spanner
- 6 mm Allen key
- Drill with 10 mm drill bit
Installation steps:
- Determine the position of the gas cylinder in the gas store or vehicle.
- Mark the 4 fixing points using the bracket.
- Drill the marked points with a 10 mm drill bit.
- Fasten the front plate of the holder using the nuts and bolts supplied.
- Guide the straps through the openings provided in the bracket and secure them firmly.
- Place the gas bottle in the holder and secure it with the straps.
Maintenance and inspection:
- Check the fastenings and straps regularly for tightness and wear.
- Ensure that there is no corrosion on the metal parts.
- Clean the holder regularly to remove dirt or deposits.
Technical data:
- Material: Stainless steel
- Compatibility: Refillable gas bottles
Conformity: The CAMPKO gas cylinder holder fulfils the requirements of UN regulation no. 67.
Manufacturer contact information
