DREHMEISTER gas filter for direct mounting on the Withdrawal valve of the gas cylinder/ LPG tank or for mounting in the gas locker. The replaceable filter insert is made of glass fibre material.
Extra-long version (136mm)
Filter inlet: G.12 = W21.8 x 1/14 LH (for other connections, use a corresponding adapter such as 107275 for adaptation)Filter outlet: G. 12 small cylinder connection
Gas type: LPG (propane/butane)Operating pressure: up to 30.4 bar
Operating temperature: -20° to 125° Dimensions: 14 x 5.5 x 5.2 cm (L x W x H)
Weight: 407 g Total length: 136 mmTotal height: 56 mm
The filter insert consists of a high-quality borosilicate-micro glass fibre mixture and meets the following standards:
TAPPI T410TAPPI T251DIN 53'887ASTM E1294ISO 16889TAPPI T403
Safety instructions and warnings
User instructions
Introduction
Thank you for purchasing the DREHMEISTER Smart W21.8 x 1/14 LH gas cylinder filter. This filter protects your LPG conversion kit from contamination and increases the service life of your appliances.
Safety and warning information:
-
Use: The filter is intended exclusively for use with LPG gas cylinders and tanks.
-
Installation: Only to be carried out by qualified personnel.
-
Leak test: Check for leaks after installation.
-
Maintenance: Regular inspection and cleaning of the filter is required.
-
Replacement: Replace the filter immediately in the event of visible damage or malfunctions.
-
Storage: Store in a dry and clean place.
Installation:
-
Preparation: Ensure that all gas valves are closed.
-
Installation: Screw the filter between the gas cylinder and the pressure regulator. Ensure that the connections are correctly aligned.
-
Leak test: Slowly open the gas valve and check all connections for leaks, e.g. with leak detection spray.
Maintenance:
-
Cleaning: Clean the filter regularly at least once a year and replace the insert if necessary.
-
Inspection: Check for cracks, corrosion or other damage.
-
Replacement: Replace the filter if there are signs of wear or damage.
Disposal:
Dispose of the filter in accordance with local regulations for metallic components.
Manufacturer contact information
Contact manufacturer
HybridSupply GmbH
Roggenhorsterstr. 9b
23556 Lübeck
Germany
https:// hybrid.supply/contact
