Loctite 648 is a special professional adhesive primarily intended for bonding various components, especially cylindrical components.
Typical applications of Loctite 648 are the fastening of gears or sprockets to shafts, the fastening of rotors to shafts and the like. The curing of the product takes place in a joint without air access, preferably between metal surfaces. The joint can be up to 0.15 mm wide.
After curing, Loctite 648 is highly resistant to vibration and impact, and the joint will not crack, loosen or leak. In addition to its high strength, the adhesive is also very heat-resistant, up to +180 °C.
Technical data
Technical data:
-
Maximum joint: 0.15 mm
-
Operating temperature: -55 to + 180°C
-
Shear strength in N/mm2: > 25
-
Thixotropy: No
-
Viscosity in mPa*s: 400 - 600
-
Handling strength after, steel: 3 minutes
-
Chemical Basis: Methacrylate
-
Colour: green
-
Remarks: high strength, good temperature resistance
-
Packaging: 50ml/55g
Safety instructions and warnings
Safety instructions for LOCTITE® 648 - 50 ml joining adhesive, high strength, low viscosity
- Always read label and product information before use.
- Causes skin irritation. Causes serious eye irritation.
- May cause an allergic skin reaction.
- Toxic to aquatic organisms with long lasting effects.
- Wear safety gloves / protective clothing / eye protection / face protection.
- IF ON SKIN: Wash with plenty of soap and water.
- IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.
- IF SWALLOWED: Call a POISON CENTRE/doctor if you feel unwell.
- Dispose of contents/container in accordance with national/regional regulations.
Manufacturer Contact information
Manufacturer Contact
Henkel AG & Co KGaA
Henkelstraße 67
40589 Düsseldorf
https://www.henkel-adhesives.com/de/de/%C3%BCber-uns/kontakt.html
