Oetiker Stepless Ear Clamps 10,3 - 12,8mm stainless

Oetiker Stepless Ear Clamps 10,3 - 12,8mm stainless

SKU: 100002
GTIN: 4250959400673
Category: Clamps
Manufacturers: OETIKER

0,48 €

incl. 19% VAT , plus

Available immediately
Delivery time: 2 - 3 Workdays (DE - int. shipments may differ)

Advantages:

- Reliable closing after cleaning or degreasing
- Reduced particle load thanks to degreasing
- Double packaging reduces the risk of contamination
- Uniform compression
- Tolerance compensation
- Improved traceability thanks to labelling
- Quick and easy assembly

Mechanical closure

As a mechanical connecting element, the lock holds the clamp geometry securely together. The clamp can be opened for radial assembly of customised variants.

Block locking

Block closure means that the two ear legs of an ear clamp touch each other during the applied closing force. The additional closing force applied from the moment a block closure occurs is absorbed by the block closure and is not transferred any further to the material to be clamped. If a statement is to be made about the effective closing force acting on the material to be clamped during closing, block closing should be avoided

Installation recommendations
The clamp ear is deformed with a constant clamp jaw force - a process that we refer to as "force-priority closing". This assembly method ensures a uniform and repeatable load on the connection with constant tensile stress on the clamp closure. When using this method to close the 167 clamps, deviating component tolerances are equalised so that the clamp applies a uniform radial force to the application.
radial force on the application. Variations in component tolerances are compensated for by varying the ear gap
(s'). Clamp assembly monitoring and process data logging are possible when using an
"Electronically controlled pneumatic clamp Oetiker ELK" in the assembly process.

Important!

- The ear height is naturally given. Do not influence the ear height, neither by changing the ear gap
nor by using integrated hold-down devices in assembly tools.
- Repeated closing of already closed clamps must be avoided

Technical specifications

Material: Stainless steel, material no. 1.4301/UNS S30400

Corrosion resistance according to DIN EN ISO 9227: ? 1000 h

Diameter range width × thickness
11.9 - 30.8 mm 7.0 × 0.6 mm

DualSlide technology: virtually frictionless clamp closure

Narrow band: concentrated clamping force transmission, less weight

360° StepLess®: even compression or surface pressure

Burr-free belt edges: reduced risk of damage to the material being clamped

Safety instructions and warnings

Safety instructions for Oetiker stepless ear clamp 10.3 - 12.8mm stainless steel:

- Before installation, ensure that the product is suitable for the intended application.

- The ear clamp must not be extended beyond the maximum diameter.

- Only use suitable tools for assembly and disassembly.

- The clamps must be checked regularly for damage and wear.

- If the clamp is damaged or worn, it must not be reused.

- The clamp must not be subjected to excessive loads.

- When used outdoors, care must be taken to ensure that the clamp is corrosion-resistant.

- Improper use or misuse may result in injury.

Manufacturer contact information

Contact manufacturer