CAMPKO gas tank bottle 30L with 80% multi-valve, tank adapter set (case), remote & direct refuelling

Gas Bottle Content Indicator Bluetooth

Usage:

The sensor is magnetically attached under the bottle.
With the help of the app "Mopeka" (available for Android and iOS), the fill level of up to 4 cylinders can be monitored. The app can be downloaded and examined in advance.

The following bottles can be selected in the app:

6kg, 11kg, 12kg, 14kg, 18kg.

The sensor is only suitable for steel bottles. Use with aluminium bottles only possible with corresponding holder.

Scope of delivery:

1x gas bottle content display Bluetooth

Certifications:

CE EN 60950-1:2006

Monitor for gas cylinder sensor (without sensor!)

Use:

The monitor can be mounted anywhere in the vehicle interior and displays the fill level of up to two gas cylinders.

Contents:

1x monitor for the interior.

Certifications:

CE EN 60950-1:2006

High-pressure hose line for connection to all wall-mounted low-pressure regulators with inlet AG M20 x 1.5.

Conformity:

- Individual fittings DIN-DVGW or DVGW-tested.

Technical data:

- Hose: rubber with textile insert
- Cold-resistant down to -30 °C

High-pressure hose KLF x M20x1.5 UEM x 450mm

High-pressure hose for connection of liquid gas cylinder and regulator

Connection: G.12 KLF x M20x1.5 UEM (cylinder connection x regulator connection)

- PVC
- DVGW tested
- cold-resistant up to -30 °C

High-pressure hose line with hose rupture safety device for connection to all wall-mounted
Low-pressure regulator with inlet AG M20 x 1.5 especially for heating while driving to the gas cylinder valve.

Advantages and features

- Heating while driving in camper, caravan, motorhome etc.
- Europe-wide use through the use of high-pressure hose lines with country-specific connections
- SBS hose rupture protection prevents gas from escaping if the hose is damaged or loosened
and shuts off the gas flow as soon as the nominal flow rate is exceeded by
is exceeded by 10
- Manual hose rupture safety device SBS: no delay or leakage of gas, but manual opening necessary

Conformity

- Individual fittings DIN-DVGW or DVGW-tested

Technical data

- Hose: rubber with textile insert
- Cold-resistant down to -30 °C

DREHMEISTER LPG attachmentwith sintered filter insert for W21.8x1/14" LPG filling adapter for W21,8x1/14". Is used as an intermediate piece on the W21.8x1/14" LPG gas connector and the HK flat filler neck or the direct refuelling adapter for gas cylinders.

Areas of application: Refuelling refillable gas bottles, motorhome gas tanks and autogas tanks (automotive).

Very suitable for installation in the filling hose (between 2 filling hoses).

T-piece with 3/4"-16 UNF thread for connecting LPG filling hoses.

Often used to connect one LPG filling point with two refillable gas bottles (e.g. CAMPKO or Alugas) operated in parallel. The T-piece connects the LPG filling hose from the filling point to the inlet side of both refillable gas bottles and allows the safe operation of a 2-cylinder gas supply system in a motorhome, camper van or caravan.

DREHMEISTER connector W21.8 x 1/14 LH -> 8 mm RVS for connecting an 8 mm line to the W21.8L tapping connection on refillable gas cylinders/tanks

Connection:

Small cylinder connection, KLF (G.12)
Large cylinder connection, comb. A (G.5)

According to EN15252: W21.8 x 1/14 LH

Outlet:

8 mm pipe connection, e.g. copper or aluminium pipe or thermoplastic hose

Connection A: 3/4-16 UNF (filling hose) 

Connection B: G1/4" (RVS - 8 mm pipe connection, e.g. copper or aluminium pipe)