LPG thermoplastic hose - 10mm, can be shortened. Approved according to ECE-R67.01 Class 1.
A practical alternative for prefabricated filling hoses.
The so-called ear clamp pliers are required for installation.
Technical data
material:
Inner core: Nylon (polyamide 6)
Binding: Chemically bonded inner core and reinforcement
Outer shell: Nylon (polyamide 6), black
Dimensions:
Inner diameter: 9.7mm
Outer diameter: 13.7mm
Bending radius: 100mm
Weight: 75gr/m
Properties:
Burst pressure test: 370 bar
Working pressure: 90 bar
Working temperature: -40°C to +125C
Homologationsnummer: E4-67R-010247
Safety instructions and warnings
Safety instructions for LPG-FIT thermoplastic hose XD-6 - 67R-01 Class 1 - 1m (angled)
1 Assembly and installation:
- Assembly and installation may only be carried out by specialised personnel who have all the necessary knowledge and skills.
- The thermoplastic hose must be checked for damage before installation. If there is any damage, the thermoplastic hose must not be installed.
- The thermoplastic hose must be firmly connected to the LPG system to prevent leaks.
- The thermoplastic hose may only be installed in a well-ventilated area.
- The thermoplastic hose must be installed in such a way that it is not excessively bent or stretched.
2. use:
- The thermoplastic hose must only be used for its intended purpose.
- The thermoplastic hose must not be used near sources of ignition or open flames.
- The thermoplastic hose must not come into contact with oil, grease or other flammable materials.
- The thermoplastic hose must be checked regularly for damage. If damaged, the thermoplastic hose must be replaced.
- The thermoplastic hose must not be bent or stretched excessively.
3 Storage and transport:
- The thermoplastic hose must be stored away from sunlight and heat.
- The thermoplastic hose must not be stored near sources of ignition or open flames.
- The thermoplastic hose must not come into contact with oil, grease or other flammable materials.
- The thermoplastic hose must be protected from damage during transport.
Manufacturer Contact information
Contact manufacturer
Solution-Fit B.V.
Werfstraat 11
7553 GZ Hengelo OV
The Netherlands
E-mail: info@solution-fit.com