LPG thermoplastic hose - 10mm, can be shortened. Approved according to ECE-R67.01 Class 1.
A practical alternative for prefabricated filling hoses.
The so-called ear clamp pliers are required for installation.
Technical data
material:
Inner core: Nylon (polyamide 6)
Binding: Chemically bonded inner core and reinforcement
Outer shell: Nylon (polyamide 6), black
Dimensions:
Inner diameter: 9.7mm
Outer diameter: 13.7mm
Bending radius: 100mm
Weight: 75gr/m
Properties:
Burst pressure test: 370 bar
Working pressure: 90 bar
Working temperature: -40°C to +125C
Homologationsnummer: E4-67R-010247
Safety instructions and warnings
Safety instructions for LPG-FIT thermoplastic hose XD-6 - 67R-01 Class 1 - 2m (straight)
- The thermoplastic hose must be installed by a qualified person. - The thermoplastic hose may only be used for its intended purpose and application. - The thermoplastic hose must not be installed near sources of ignition. - The thermoplastic hose must be checked regularly for wear, damage or leaks. - The thermoplastic hose must not be overstretched or kinked. - Before connecting the thermoplastic hose, ensure that all connections and joints are clean and free from contamination. - The thermoplastic hose must not come into direct contact with sharp-edged or rough surfaces. - The thermoplastic hose must be kept away from heat sources. - The thermoplastic hose must not be bent or twisted excessively. - The thermoplastic hose must be checked for compatibility with other system components before commissioning. - If leaks or damage are detected, the thermoplastic hose must be replaced immediately. - The thermoplastic hose must not be laid near electrical or hot surfaces. - The thermoplastic hose must be installed in accordance with the applicable laws and regulations. - The thermoplastic hose may only be installed or repaired by qualified personnel. - The thermoplastic hose must be kept away from heat sources. - The thermoplastic hose must not be excessively stretched or kinked. - Before using the thermoplastic hose, all connections and joints must be clean and free from contamination. - The thermoplastic hose must be inspected regularly for signs of abrasion, damage or leaks. - The thermoplastic hose may only be used in accordance with the applicable regulations and standards. - Do not use the thermoplastic hose if it is damaged or leaking.
Manufacturer contact information
Contact manufacturer
Solution-Fit B.V.
Werfstraat 11
7553 GZ Hengelo OV
The Netherlands
E-mail: info@solution-fit.com
